The Geology of Fukushima. Porous ground, lowered 10 metres, built over an aquifer with a fault line present, with basements below sea level

SOP for nuclear industry. Below the following article I have placed a further paper, Corium Potential Flow Paths, mainly to annoy the paid nuclear hacks at Flinders and Adelaide Universities. (next time you lot send paid agents of US DOE to disrupt public meetings about Fukushima at Uni SA, have the decency at least to have the hack declare his funding source.)

Fukushima 福島第一

12 novembre 2011
The Geology of Fukushima

By Pierre Fetet, posted in Le blog de Fukushima

Translation from French: Robert Ash

download link:

see original link and download for full text and diagrams and maps.

At a time when everyone is wondering where the coriums of the crippled Fukushima Daiichi nuclear plant may be, it is interesting to know the nature of the terrain where they could possibly be hiding. Although all documents used to write this article are readily available, most are in Japanese and this explains that to date knowledge of the geology of Fukushima is fragmented. Based on the geological survey that was conducted prior to building the plant, as well as on results of seismic testing and recent research related to drilling, this article will attempt to give an updated picture of the nature of the substratum of the nuclear plant, which may help to predict possible developments in the currently unfolding disaster.

General geological environment

The Fukushima Daiichi Power Station is located on the east coast of Honshu island, in northeastern Japan, on a Cenozoic sedimentary ground, i.e. belonging to the current geological era (from 65.5 million years ago to the present). It is separated from the Abukuma granite plateau by the Futuba fault.

The geological map shown above is from an illustration entitled “Tectonic division of Abukuma Mountains and location of borehole” taken from the article “Granitoids with 300 Ma in the Joban coastal region, east of Abukuma Plateau, northeast Japan” (Authors: Tstsumi, Yukiyasu; Ohtomo, Yukiko; Horie, Kenji; Nakamura, Ko-ichi; Yokoyama, Kazumi), Journal of Mineralogical and Petrological Sciences, Volume 105, p. 320-327 (2010).

This map was produced when a 1005 meter-deep drilling operation was carried out in an area situated a dozen kilometers south of the Fukushima Daiichi plant, close to the Fukushima Daini plant. Published in 2010, it is the latest that we can rely on to learn about the overall geological context of the crippled plant.

Coring conducted by researchers shows that the layer of sedimentary rock which makes up the soil of the east coast of Japan over at least a hundred kilometers has a thickness of 815 meters at the latitude of Fukushima Daini.

A well documented site

For more detailed information on the geology of the soil of the Fukushima Daiichi plant, the following three other documents are essential references: the first is the geological survey that was conducted prior to the construction of the plant (1967); the second is a safety assessment in terms of seismic risk of the nuclear site, published by Tepco in May 2009; the third is an expert appraisal summarizing the situation of the Fukushima Daiichi plant from a geological and seismical perspective, which was published by the Japanese authority for nuclear safety, the NSC (Nuclear Safety Commission), in June 2010.

The first paper brings together two cross-sections of the ground at the site of the future plant: one east-west, another north-south. Based on this document, backed by a photo of the site before construction (1966), we realize that the coast was originally rocky and that the sedimentary plateau has been excavated in order to achieve the earthwork for the construction of the nuclear plant. As anticipated in the cross-section (marked by the dotted red line), the excavation lowers the ground to 10 meters above the sea and the digging of the basement is below sea level.

Geological study of the Fukushima Daiichi site before 1967 (Cross-sections colorized and annotated in French by the author from an original Japanese document in black and white. Source:, page 103)

The site before construction, in 1966

In order to build the plant – originally only Unit 1 – the upper sedimentary layers were excavated. These are Quaternary alluvial deposits composed of clay and sand which are friable or semi-hard (green and brown in the cross-section). Thus the plant was built on “mudrock” type sedimentary rock (yellow in the cross-section), which is a muddy rock composed of clay and silt (very fine sand). But the term “muddy” does not mean that the rock is soft. It simply means that it is a rock whose matrix is clay; it is also called “argillite”.

The second report examines the response from the ground to waves emitted from the surface over the entire site, particularly under the common cooling pool, which is located west of Unit 4. This pool, designed to cool more than 1000 tons of spent fuel, was the subject of particular attention: the east-west and north-south cross-sections intersect at this precise location.

Map of the site

with location of the cross-section below

(red line)

East-West cross-section (Thanks to Hiroko for her help in translation)

This cross-section shows a ground discontinuity at a depth of around 200 m, corresponding to a change in the nature of the rock. Between ground level and -200 m, we find the geological layer of Tomioka, dating from the Neogene; the layer below it is older, it is labeled as belonging to the Paleogene – Neogene and corresponds to the Taga layer.

The third paper presents a detailed analysis, also shown in two cross-sections, of the various geological strata inside this thick Cenozoic sedimentary coating. This is the list of the main strata, identified by letters, from the closest to the surface ground, down to the deepest. It is followed by maps, cross-sections and an analytical table:

– T3: muddy and sandy rock (Tomioka layer, Neogene)

– T2: sandstone with some inclusion of tuff (Tomioka layer, Neogene)

– T1: sandstone with heavy inclusion of tuff (Tomioka layer, Neogene)

– TI: clayey sandstone (Taga layer, Paleogene – Neogene)

– Yu: alternating muddy and sandy rocks (Yunagawa layer, Early Miocene)

– Sr: hard sandstone and muddy rocks (Shiramizu layer, intermediate between the Oligocene and Miocene)

Map showing location

of the two cross-sections

(see below)

East-West cross-section (location of the plant added in red)

North-South cross-section (location of the plant added in red)

Analytical table: Stratigraphic geology of the site of Fukushima Daiichi. (Table made from an original document in Japanese. Thanks to Marielle for her help.)

Source:, p. 14

A suspicious fault

In several of these cross-sections, an ancient fault, predating the later Miocene, is clearly visible under the nuclear site. Whereas the geological survey conducted prior to the construction of the plant does not reveal this fault (drilling did not go beyond a depth of 200 meters at the time), it is clear from the documents dated 2009 and 2010 that Tepco and the NSC have known about it for several years. The following cross-section shows this fault with even greater depth (- 1300 m):

Fukushima Daiichi fault

(source NSC: , p. 13)

There is obviously a need to reconsider the way authorizations are granted for the building of nuclear plants (1). A non active fault behaves like a dormant volcano: once a seismic or volcanic event is known to have occurred even in a very remote past, it has the ability to recur if the conditions are met again. It would not be surprising if, during the earthquake of March 11, 2011, this fault had been reactivated, causing severe damage to the plant, such as this crack discovered after the quake:

Source of photograph: Tepco

Permeability of the layers

Andreas Küppers, a German geologist who had intervened on the site during the construction of the plant, was interviewed in March 2011 by the newspaper Die Welt. According to this specialist from the GeoSearch Center Potsdam (GFZ Deutsches GeoForschungsZentrum), the different layers of argillite on which the plant is built are likely to be waterproof and should be able to prevent contact with groundwater (2). But this opinion is not shared by everyone. One dissenting Japanese geologist, for example, – who wishes to remain anonymous – has been noted for his views expressed on a U.S. forum, “Physics Forum”: according to him, the bedrock of the region is made of coarse, very permeable sandstones, and contains vast amounts of water from the neighboring Abukuma mountain. This groundwater, he claims, is flowing under the plain towards the sea at a very low speed of about 50 cm / day (3).

In fact, in light of the collected data, it seems that the views of these two geologists may not be conflicting after all, because both types of layers do exist: argillite (or silt) and sandstone. However, Andreas Küppers, in line with Tepco’s style of communicating, refrains from disclosing all the information he possesses: namely, that there is not only waterproof argillite, there are also some strata of permeable sandstone, which allows groundwater to move towards the sea. Moreover, the presence of this fault under the plant makes it possible for the water to sink down vertically without being stopped by a horizontal waterproof layer of argillite, and allows connection between several sheets of groundwater which one would have thought were independent.

Good and bad news

The good news is that the radioactive water leaking from the plant will not be able to spread towards the Japanese inland and the Abukuma plateau due to the downward slope of the geological layers. The bad news is that there exists a fault which appears to be active right under the Fukushima Daiichi plant itself: this allows, and will continue to allow, radioactive pollution of aquifers over a depth of several hundreds of meters, as it runs through the different “waterproof” strata (4). This also means that the radionuclides will naturally be carried towards the sea by this underground water stream flowing through the permeable layers of sandstone. Sandstone is indeed the ideal rock for aquifers, as it is both permeable and fractured, providing easy movement of water. And finally, there is the problem of the type of rock on which the plant was built being rather “soft”, meaning that an earthquake can only destabilize the buildings.

As early as March 31, 2011, Tepco announced that the groundwater was contaminated with radioactive iodine, according to an analysis of a sample taken at a depth of 15 meters under the first reactor (link). Today, if one or more coriums have sunk into the ground, this pollution has very likely been increasing. But Tepco no longer shares any information about the pollution of groundwater. Their only concern is to present a beautiful reassuring façade, which will never solve this disastrous pollution of soil and groundwater: underground contamination is irreparable, because there is no access to it.

(1) In France, unfortunately, the situation is no better: the nuclear safety authority seems to have expressed no objections to the expert appraisal conducted by EDF, which appears to have falsified data pertaining to seismic hazard for several nuclear plants out of concern for profitability.

Source documents may be consulted at:

(2) “Die Wahrscheinlichkeit ist hoch, daß dieses Gestein dicht ist und keinen Kontakt zu Grundwasserleitern zulässt”, Die Welt, March 15, 2011.

(3) This information on the origin and direction of water flow is confirmed by the first cross-section in this article: the general downward slope of Quaternary strata goes from the mountain to the coast.

(4) Yesterday again, Tepco was pretending to have no knowledge of the fault over which the plant is built, and was trying to divert attention by discussing some active faults located 50 km from the site! Link to this bulletin from NHK: Link to a video from JAMSTEC that shows a recently discovered active fault on the seabed off the coast of Fukushima:!


The following sources were consulted when writing this article:

Classification of sedimentary rocks (Université Libre de Bruxelles):

Different geological layers in the region of Fukushima:

Geological cross-sections of the Fukushima Daiichi plant:

Classification of detrital rocks:

Sandstone permeability:

Article on the northeast coast of Japan:

Wikipedia Hydrology:


Original article in French:

“La géologie de Fukushima”

I finally have a coherent picture. 2.5 years of obstruction by nuclear industry aimed at preventing people from having any coherent picture of the sequence of decisions which resulted in this nuclear disaster. 1. They lowered the Fukushima coast by 10 metres to make it cheaper to pump cooling water to the proposed power plant. 2. They built the power plant over an aquifer and on ground with a fault line present 3. They built the basements below sea level. 4. The quake diverted the underground river of the aquifer through the basements 5. Being below sea level the emergency generators and switchgear were doomed to be flooded. 6. cooling failed, the reactors melted down, the 70 holes in each reactor bottom (design of control rod entry) meant fuel and water leaked from bottom of reactors. 7. TEPCO decision to put emergency generators and switchgear in basements. to save money in 1966. 8. 400 tons of water must be poured into reactors per day to keep them cool. 9. this water enters the underground river and flows to the sea. 10. fuel is too radioactive to approach and remove and will remain so for years. 11. the flow of radioactive water to the sea will continue. 12. No nuclear expert on earth knows the disposition of the fuel inside and outside the reactors. 13. Japan and the world must live with this disaster for a long time to come. 14. There is insufficient knowledge and no technology which will stop lthis disaster soon. 15. The past 2.5 years have seen a river of lies and with holding of information about these facts. The idea that freezing the soil will stop the flow of water to the sea is insufficient to work. Can they freeze enough and go down deep enough to freeze the aquifer? I doubt it. They have not started yet. 16. If all the known facts of this had been disclosed in March 2011, the people of Japan and the world would have turned with very great anger against the people who did this and defend this. The delay in information has actually made this anger worse.

f I were a rich man living in Japan I would start fish farming in the lakes of Japan and become even richer, for I would not eat anything caught in the sea. Sorry to say.

Corium Potential Flow Paths:

There was an estimated 50 tons of reactor fuel and 800 tons of graphite left in the reactor at Chernobyl after the explosion there.
Fukushima has an estimated 70 tons of fuel in unit 1 and 90 tons of fuel in units 2 and 3. It is not know how much was ejected in
the explosions at Fukushima. So the reactors at Fukushima may contain more fuel in the core, but Chernobyl has a large amount of
graphite mixed in.

Below is a rough drawing to show the concrete thicknesses, potential corium flow paths and structures at Fukushima. The illustrated
volume of corium in the drawing is not intended to be a visual estimate of volume, but is to aid seeing the potential areas corium could
flow. One structure of note is the small sand pit below the torus pipe where it meets the containment bulb. This creates a small dip in
the floor of containment at the edge where the pipe connects and shows a thin spot in containment to the pipe. There is an estimated
10.3 meters of concrete directly below the reactor. The reactor itself is housed in a tube of concrete, the control rod mechanisims are
inside so many penitration holes are likely. The concrete at the bottom of the supression chamber is about 2.7 meters and the side wall
of the supression chamber is about 1.5 meters thick. The sump hole in the bottom of the supression chamber leaves even less concretebelow it.

Image from inside the torus looking at one of the pipes that lead down into the torus from containment.

Corium flow at Chernobyl.
The map below shows the corium flow at Chernobyl. It shows both lateral and vertical paths.

Another view of Chernobyl and corium paths.

Images of corium flow at Chernobyl. These were taken 10 years after the Chernobyl accident. Radiation levels were still extremely

Fukushima radioactive water leak an ’emergency’

6 August 2013 Last updated at 06:44 GMT Help

Japan’s nuclear watchdog has said the crippled Fukushima nuclear plant is facing a new “emergency” caused by a build-up of radioactive groundwater.

A barrier built to contain the water has already been breached, the Nuclear Regulatory Authority warned.

This means the amount of contaminated water seeping into the Pacific Ocean could accelerate rapidly, it said.

Rupert Wingfield-Hayes reports.